Furniture problem? - matte polishing of wood vs. shiny polishing
waz ok and my nails Cuzin Paintin and left the roof open ... Later I went to the nail polish and put things there, but some Poles poured into the tablecloth on the table and tried to remove it with solvents, and saw again the tissue bleed through and I lifted the cloth and wood gnawing ate my Cuzin told me a bookmark cover in your bed bath and beyond may be that, but if not do u guys have any suggestions?
Tuesday, February 16, 2010
Matte Polishing Of Wood Vs. Shiny Polishing Furniture Problem?
2 comments:
The guest mentioned your friend comes in various shades of "wood" color. Unfortunately, the work is not because the solvent in nail polish not allow ink markers take a long time. What you need to do is pretty simple. Use sandpaper to sand the area until you reach the real wood, usually a lighter color. Then apply a small amount of paint on wood and then (some seal if the timber already) stain.
This should take 1 hour and 1-2 hours to dry.
Steps Procedure
1 Out Apply ink (pen, ink, markers and Graffiti Remover) sparingly to the center of the area affected. Allow 2 to 5 minutes dwell time. WARNING: Pre-Test on an inconspicuous area.
2 Blot - a clean towel or cloth towel dry white binding material. Furthermore, the move to dry areas of towel applying pressure to clean.
3 Get Spot Dry - dry the area immediately using a circular fan or hair dryer (no heat) to prevent absorption. Repeat steps if necessary.
Post a Comment